The steel construction body is covered with special plates filled with polyester, wood and styrofoam inside and outside. The body is lifted by a scissor system powered by two synchronized telescopic hydraulic cylinders. There are lock system to fix the wheelchairs and the stretchers. Fresh air is provided by the ventilation fan and through all-round windows on both sides. On the rear, there is observation window and double wing door to access into the body whereas. On the front side, there is one single door. There are two folding seats in the body. There are handrails on the left and right walls of the body.


Extendable front platform is made of steel profiles and moves with the body to serve the aircraft. Front platform is extended by means of a hydraulic cylinder. Floor is covered with checkered aluminium plate. On full cab applications one independent, with half cab applications two independent platforms are provided.


Truck is defined as per customer demand / technical requirements.


The van body is provided by a foldable tail lift made of steel profiles and powered by a hydraulic cylinder via chain-pulley system to be used to carry wheelchair or stretcher and their companion. The floor is covered with checkered aluminium and provides a ramp to aid wheelchair loading and handrails for safety.


The hydraulic system is provided with an oil tank, a pump driven by the truck engine, cylinders, safety valves (Self actuated locking valves in case of a pressure loss), hydraulic valves. There is an emergency hand pump which can also be used in case of engine failure.


It has a deceleration and docking system controlled by sensors for a safe docking of the vehicle. When the vehicle starts to approach to the aircraft, the system slows the vehicle down and stops to prevent the vehicle from hitting the aircraft. System allows driver or operator to brake and deactivate the system when it is active.


The stabilizing system consists of 4 vertically operated hydraulic support jacks. The jacks work in simultaneously.


The platform is hot-dip galvanized and other parts are custom painted.


LED Type lighting fixtures, projector in front and rear of the platform, gabary lamps at the corners and a beacon are provided on the van body.


  • Canopy (To protect from Rain, Sun and Wind)
  • Electric emergency pump
  • Heating and cooling for the van body     
  • Side door and climbing stair   
  • Access stair for platform when the body is in drive position.   
  • Custom paint and logo application   
  • Half cap (to minimize front service height)
  • Half cab with fixed single platform
  • Half cab with right/left movable platform (4 -way) 
  • Ceiling hand rails   
  • Sliding door for the front side.
  • Winter kit